The bending work is a permanent deformation process, so it must be carried out with tools that provide an accurate, high-quality final result. Therefore, the bending tools have a fundamental role and need to be chosen with care.
The tool range available for this mechanical process is varied, and it includes tools that have different shapes, angles, radii and heights. Let's focus on some parameters to be taken into account when choosing the tools.
Shapes.
The main difference to distinguish one profile form another is the type, or the shape of the profile itself. The most common punches are straight (or "relieved”) and “gooseneck”.
These two shapes can form most bends, so you should always have them available.
Height.
Another important parameter is the tool height, both of the die, and of the punch. One of the most frequent difficulties faced in determining the best bending sequence is having to perform bends that are really close to each other with long flanges.
Using tools with a great height allows to easily overcome this and many more difficulties.
Hardness.
Tools act directly on the sheet metal and they have to deform materials that can be highly resistant. In order to minimize the risk of damages, it is necessary to use tools made of steels with high mechanical strength.
As the tool surface will directly touch the sheet metal, surface hardness is also extremely important to prevent premature wear and tear.
Choosing high-quality press brake tools that are properly hardened and suitable for the most challenging bending operations ensures safe performances and high-quality final products.
Functionality.
In addition to these parameters, you must remember that multifunction tools can solve a wider range of bending operations. Punches and dies with an acute angle (up to 30°) are frequently chosen because with "air bending" you can form a great variety of angles.
However, this choice implies the potential risk of deforming all the holes situated close to the bending lines. This distortion can be reduced by using, when possible, punches and dies with angles close to 90° (85°, 86° 88°), or dies with roller bars on the shoulders, allowing to follow the sheet metal moving during the bending phase.
Choosing multifunction tools helps to make the job easier, but you need to carefully evaluate each bend requirement, especially when the workpiece has close tolerances.
Maintenance of big tools.
Another aspect to take account of when choosing the tools is the maintenance required by the biggest tools. Given their size and weight, the tools might be damaged during the operation, or, even worse, the operator might be hurt or injured.
The best solution is, therefore, to use segmented tools, which allow for a higher degree of flexibility and have reduced length and weight. They are also easier and safer to handle.
Special tools.
Finally, it is important to remember that some jobs requiring non-standard bending operations need special tooling.
Moreover, a press brake tool can be customized to obtain a sequence of bends in a single operation.
Choose quality, obtain excellence.
Remember to always choose tools that meet these two important goals: obtaining a high-quality finished product, in the shortest possible time.
Since 1970 Eurostamp has been making press brake tooling and equipment, taking care of the quality of raw materials and of the finished products. We have always stood next to our clients, responding to any request promptly and efficiently.
Visit Eurostamp's Virtual Warehouse.
Do you have any special bending needs? Ask Eurostamp.